HUATEC Digital High Resolution Ultrasonic Flaw Detector 120dB,0.5-15Mhz
دستگاه آلتراسونیک HUATEC
Main faetures:
? Automated calibration,Automated gain, 0-120dB gain
? DAC,AVG,TCG,B scan,AWS
? High-speed capture and very low noise
? Solid metal housing,water / oil proof,dust proof
? high contrast viewing of the waveform from bright
? Powerful pc software and reports can be export to excel
Other assistant function
|
Parameter |
Title |
Parameter |
Measuring Range(mm) |
0 ~ 10000 |
Measurement Mode |
Single,Dual,Thru |
Vertical Linearity Error |
≤3% |
Reject |
0~80% |
Horizontal Linearity Error |
≤0.1% |
Pulse Displacement(μs) |
-20 ~ +3400 |
Sensitivity Leavings |
≥62dB |
Zero(μs) |
0.0 ~ 99.99 |
Dynamic range |
≥32dB |
Port Type |
BNC(Q9) |
Resolving Power |
≥36dB |
Operating Temperature (?) |
-20~50 |
Frequency Range(MHz) |
0.5 ~ 15 |
H×W×D(mm) |
240×156×48 |
Gain(dB) |
0 ~ 120 |
Weight(kg) |
1.0(with battery) |
Material Velocity(m/s) |
1000 ~ 15000 |
|
|
021-77130687-8
021-77228679
09122710269
www.ppkgroup.ir
Standard Delivery:
Main unit
2.5MHZ-?20 straight probe
4MHZ-8x9mm, 60degree angle probe
4A/9Vpower adapter
Probe connection cable (BNC to BNC)
Probe connection cable (BNC to Lemo 00)
Instruction manual
Carrying case
RS232-USB converter
آلتراسونیک HUATEC
Additional Accessories:
Data managing software
Data managing cables RS232
Straight probe (5MHZ-?20)
Straight probe (2.5MHZ-?20)
Straight probe (2.25MHZ-?20)
Straight probe (1MHZ-?20)
Angle probe (4MHZ-45degree, 8*9mm)
Angle probe (4MHZ-60degree, 8*9mm)
Angle probe (4MHZ-70degree, 8*9mm)
Angle probe (4MHZ-80degree, 8*9mm)
Angle probe (2MHZ-45degree, 8*9mm)
Angle probe (2MHZ-60degree, 8*9mm)
Angle probe (2MHZ-70degree, 8*9mm)
Angle probe (2MHZ-80degree, 8*9mm)
Probe T/R (5MHz-?20mm, focus 15mm)
Probe T/R (2.5MHz-?20mm, focus 15mm)
Connection cable to probe (BNC-BNC)
Connection cable to probe (BNC-Lemo 00)
Connection cable to probe (BNC-Lemo 01)
Connection cable to probe (Lemo 00-Lemo 01)
Lithium ion battery
Power adapter (4A/9V)
Power Cable
Leather case
Title |
FD510 |
FD520 |
FD550 |
Measuring Range |
0-6000mm |
0-10000mm |
0-10000mm |
Material Velocity(m/s) |
1000-15000 |
1000-15000 |
1000-15000 |
Gain(dB) |
110dB |
120dB |
130dB |
Frequency Range(MHz) |
0.5-15M |
0.5-15M |
0.5-20M |
Memory |
500 |
1000 |
1000 |
independence setup |
100 |
500 |
500 |
sz dB,? |
? |
? |
? |
Peak Hold and Peak Memory |
? |
? |
? |
B scan |
X |
? |
? |
DAC |
? |
? |
? |
AVG |
? |
? |
? |
TCG |
X |
? |
? |
STANDARD(13 standards in-built) |
? |
? |
? |
Automated calibration( IIW ) |
? |
? |
? |
Automated calibration(two hole ) |
X |
X |
? |
6dB DAC |
X |
? |
? |
make video |
? |
unlimited |
unlimited |
pc software |
? |
? |
? |
updated online |
? |
? |
? |
curved surface correction |
? |
? |
? |
AWS |
? |
? |
? |
Pulse energy |
? |
? |
? |
Pulse width |
? |
? |
? |
Gate alarm |
? |
? |
? |
DAC alarm |
? |
? |
? |
continue working time |
9 hours |
12 hours |
12 hours |
Port Type |
BNC |
BNC |
BNC |
Overall dimension (mm) |
238×160×48 |
238×160×48 |
238×160×48 |
Weight (kg) |
1.0 |
1.0 |
1.0 |
دستگاه عیب یاب پیشرفته اولتراسونیک فیزره
دستگاه عیب یاب اولتراسونیک فیزره Olympus mx 2
This second generation OmniScan MX2 increases testing efficiencies, ensuring superior manual and advanced AUT application performance with faster setups, test cycles, and reporting, in addition to universal compatibility with all phased array and ultrasound modules: past, present and future. Designed for NDT leaders, this high-end, scalable platform delivers true next-generation NDT performance
The OmniScan MX2 offers a high acquisition rate and new powerful software features for efficient manual and automated inspection performance-all in a portable, modular instrument
Design with NDT SetupBuilder
NDT SetupBuilder is a new PC-based software allowing to create inspection setup and visualize beam simulations
This software presents multiple features for easy, fast, and comprehensive inspection strategy elaboration that can directly be imported in the OmniScan MX2
The most efficient way to create a setup is to perform the simulation in NDT SetupBuilder, and import it directly to the OmniScan. Afterward, only a few operations such as gate and range settings, are required in the OmniScan prior to starting the acquisition. However, with its automatic probe recognition capability the OmniScan MX2 can also be used to create a complete setup using the following features:
Thanks to its new partners, NDT SetupBuilder and OmniPC, the OmniScan MX2 can be used to perform all steps required for the inspection directly on its large touch screen or be dedicated to calibration and acquisition tasks.
The Calibration Wizard ensures that every focal law in every group is the direct equivalent of a single-channel conventional flaw detector for compliance to codes. The user is guided step-by-step through Velocity, Wedge Delay, Sensitivity, TCG, DAC, AWS, and encoder calibrations. TOFD PCS calibration and lateral wave straightening can now be performed automatically
The OmniScan MX2 enables easy configuration of inspection parameters for either manual, or one-line, raster, or helicoidal encoded scans. The acquisition is displayed in real time and offers the ability to rewrite data that can be stored within full A-scans, S-scans, and/or C-scans on a hot-swappable SD card or USB 2.0 device
OmniPC is a new software program that benefits form the same user interface and analysis and reporting features as the OmniScan with the added flexibility to be run on a personal computer.
With OmniPC, the OmniScan unit can now be used strictly for scanning while analysis is performed simultaneously on a personal computer. This software can also be used in conjunction with extra large screens for increased visibility, and with keyboard shortcuts for faster operations.
The OmniScan MX2 and OmniPC can both be used to generate reports with an indication table listing up to eight readings, such as amplitude, position, and size of the defects. The report can also be customized with additional readings and comments specific to each indication, and can be saved as an HTML document. RayTracing tools allow the indication positions to be represented on the weld profile. High-resolution images can be inserted along with all relevant inspection parameters
The OmniScan MX2 is an important part of your inspection solution, and can be combined with other critical components to form a complete inspection system. Olympus offers a complete product range that includes phased array probes, scanners, analysis software, and accessories, all of which are integrated and packaged into rapidly deployable, application-specific solutions for quick returns on your investment. In addition, Olympus offers a high-quality calibration and repair service worldwide, that is backed by a team of phased array application experts to ensure that you get the support you need.
![]() |
![]() |
![]() |
![]() |
Pressure Vessel Weld Inspection
جهت مشاوره و دریافت پیش فاکتور و مطلع شدن از دیگر تجهیزات وابسته به این دستگاه لطفا با کارشناسان واحد فروش شرکت پترو پژوهش تماس حاصل فرمائید PPKGROUP.CO |
Composite Inspection Olympus offers complete solutions for the inspection of carbon-fiber-reinforced polymer structures. These solutions are based on the OmniScan flaw detector, the GLIDER™ scanner, and dedicated probes and wedges designed for CFRP flat panel and radius inspection. |
Weld Inspection of Small-Diameter Pipes When coupled with the COBRA manual scanner, the OmniScan flaw detector is capable of inspecting pipes ranging from 0.84 inch OD to 4.5 inch OD. With its very slim design, this manual scanner is able to inspect pipes in areas with limited access. |
Corrosion Mapping Inspection The OmniScan PA system with the HydroFORM scanner is designed to offer the best inspection solution for the detection of wall-thickness reductions resulting from corrosion, abrasion, and erosion. For this application, phased array ultrasound technology offers superior inspection speed, data point density, and detection. |
021-77130687-8
021-77228679
فروش دوربین حرارتی
FLIR ONE
تبدیل گوشی هوشمند به دوربین ترموویژن
دوربین حرارتی ،دوربین ترموویژن فیلر
با دقت 480*640
ترموویژن آتشنشانی K2
ترموویژن آتشنشانی K2 کمپانی فلیر
رزولوشن : 120*160 پیکسل
زائیه میدان دید : 35*47
فرکانس عکس برداری 9 هرتز
صفحه نمایشگر 3 اینچی با رزولوشن 240*320
محدوده دمای اندازه گیری 20- تا 500 درجه سانتی گراد
دقت اندازه گیری
±4°C (±7.2°F) or ±4% of reading, for ambient temperature 10°C to 35°C (+50°F to 95°F)
حالت های اندازه گیری
TI Basic fire-fighting mode (default)
Black-and-white fire-fighting mode
Fire mode
Search-and-rescue mode
Heat detection mode
Cold detection mode
Building analysis mode
021-77130687-8
021-77228679
09122710269